Start by changing the sidestream filter . The new filter captures any gunk and particles resulting from the flushing that comes after. A descaler such as F 3 is added to the chemical-three feed tank. The machine pushes these chemicals into the rest of the system in timed periods and automated pressures. Compounds can likewise be added to a pressure-release valve component in the event the drinking water boiler process is supposed as such.
Close the power off on the drinking water boiler and then block the water flow in penetrating it. Drain off as much water as the chemical added to the mixer thus the water boiler does not overflow during the blending process. Keep adding the solution to arrive in the desirable PSI. The chemical solution should be permitted to sit approximately a week ahead of performing the following upcoming steps.
Subsequent to the treatment sits the required level of time, then flush the whole system with clean water. The following process usually takes a couple of hrs. Re Fill the boiler. Add a drinking water purifier to it like F1 to assist stop the build-up of scale in the future. Add a new side-screen filter. aosymm6zzk.